|
Clamp Cell for Low Temp. Optical Applications
Part of the cryoDAC series
[Formerly Tinycell]
Product Description
The Diacell® cryoDAC-Tesla is a very small cell (11.5 mm cube) and was designed for applications that require a diamond anvil cell to operate in a cryostat within a high magnetic field AND with the diamond-diamond axis in the horizontal plane. The cell is made of BeCu alloy. Pressure is applied by clamping the cell itself between two copper hemicylinders that are driven by a pair of left-hand/right-hand bolts.
Applications
The CryoDAC-Tesla has been designed for optical use under high-magnetic fields and at low & ultra-low temperatures. We are also able to supply the CryoDAC-Tesla in smaller diameter versions. Please contact us if this is what you require.
Technical Specifications
| Cell Material |
High Strength Beryllium Copper |
| Anvil Support Plate |
Beryllium Copper |
| Pressure Mechanism |
Screw Drive
|
Maximum Pressure
|
20 GPa |
| Temperature Range |
Ultra-Low Temperatures |
| Top Angle |
Conical 25° |
| Bottom Angle |
Conical 25° |
| Lateral Access |
4 holes |
| Heating |
N/A |
| Cooling |
Via Cryostat
|
| DAC Diameter |
24 mm |
| DAC Height |
47 mm |
| Working Distance to Sample |
12 mm |
| Numerical Aperture |
0.57 |
| Interfacing Solution |
TBC |
Maximum pressure is dependent upon the culet size of the anvils. easyLab is committed to its policy of continuous improvement. Specifications may change without notice. easyLab and Diacell are registered trademarks of easyLab Technologies Ltd.
Parameters
|
Experimental Techniques
|
far-IR |
Fluorescence |
FTIR |
Infrared |
Raman |
|
|
Maximum Pressure
|
1 GPa |
10 GPa |
3.0 GPa |
30 GPa |
|
|
Temperature Range
|
Low Temperatures |
Ultra-Low Temperatures |
|
|
