easyLab - science under pressure
Home Contact Us
 
  PRODUCT SEARCH:
 
 

easyLab Technologies Ltd
Science & Technology Centre
The University of Reading
Earley Gate, Whiteknights Road
Reading, Berkshire
RG6 6BZ, United Kingdom
phone: +44 (0)118 935 7272
fax: +44 (0)118 935 7271
email: info@easyLab.co.uk

Sales: sales@easyLab.co.uk
Support: support@easyLab.co.uk

Diacell® μScopeDAC-HT(G)

Boehler microDriller
Diacell® μScopeDAC-HT(S)
Diacell® μScopeDAC-RT(G)
Optiprexx PLS

Anvil Jigs
Diacell® Gas Membranes
Diacell® GM Controller
Diamond Anvils
Gasket Blanks
Heaters
Ruby Powder and Spheres
Support Plates

Application Note

 

« Back to Products
Diacell® μScopeDAC-HT(G)

Gas Membrane-Driven High-Temp. Microscope Cell
Part of the Diacell μScopeDAC series

[Formerly HTMC–HT Microscope Cell]

Product Description

This versatile, gas membrane driven, high-temperature, diamond anvil cell, meets the growing need to reach very high pressures and be compatible with the optical and physical constraints of microscopes.  It is suitable for optical work under FTIR and Raman microscopes and has an internal gasket heater that operates to 600°C.  The cell is supplied fitted with a K-type thermocouple and is suitable for water cooling. 

The Diacell® μScopeDAC-HT(G) is only 25 mm thick along the optical axis, and is symmetrical about the sample.  Thus, the physical distance from the objective to the sample between the diamond anvils is just 12 mm.  This makes the Diacell® μScopeDAC-HT(G) compatible with most, if not all, commercial Raman and FTIR systems.

Applications

A large and increasing percentage of optical and spectroscopic observations is now made using microscopes.  In particular, Raman instruments are commonly sold with integral microscopes to enable efficient scattered light collection, as well as to permit Raman mapping of complex samples.  Similarly, FTIR spectrometers are often supplied with reflecting (Cassegrain) microscopes.  The Diacell® μScopeDAC-HT(G) is particularly suited for such applications.


Technical Specifications

Cell Material Stainless Steel AISI 440C
Anvil Support Plate
Tungsten Carbide
Pressure Mechanism (G) Gas Membrane
Maximum Pressure 50 GPa
Temperature Range High Temperatures (up to 400°C)
Top Angle Optical: Conical 52°
Bottom Angle Optical: Conical 52°
Lateral Access N/A
Heating Internal gasket heater
Cooling Water cooled
DAC Diameter 60 mm
DAC Height 25 mm
Working Distance to Sample 12 mm
Numerical Aperture 0.55
Interfacing Solution N/A

Maximum pressure is dependent upon the culet size of the anvils.
easyLab® is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of easyLab Technologies Ltd.

Parameters

Experimental Techniques far-IR | Fluorescence | FTIR | Infrared | Microscopy | Raman |
Maximum Pressure 1 GPa | 10 GPa | 3.0 GPa | 30 GPa | 50 GPa |
Temperature Range High Temperatures | Room Temperature |


Home  |  About Us  |  Products  |  Customer Support  |  Downloads  |  News  |  Customers  |  Partners  |  Contact Us
    Web Designers Guildford Surrey