|
Gas Membrane Driven DAC for Optical and X-ray Applications
Part of the Diacell OmniDAC series
[Formerly WCM-7]
Product Description
Based on the OptiDAC Series' characteristics, the Diacell® OmniDAC was designed for both X-ray diffraction and optical studies taking advantage of the gas membrane drive mechanism. Extended lateral sight holes allow the observation of scatter at directions normal to the cell axis. The Diacell® OmniDAC is equipped with an internal ring heater enabling the heating of the sample to about 600°C.
The gas membrane drive requires, additionally, the Diacell® GM Controller unit containing valves, couplings, pressure measurement and digital display modules. A quick-release Swagelok coupling allows ready disconnection of the cell from the control box, without loss of gas pressure.
Applications
The Diacell® OmniDAC was designed for both X-ray diffraction and optical studies at room and high-temperatures.
Technical Specifications
| Cell Material |
AISI 440C |
| Anvil Support Plate |
Tungsten Carbide |
| Pressure Mechanism |
Gas membrane drive |
Maximum Pressure
|
100 GPa |
| Temperature Range |
Room and High Temperatures |
| Top Angle |
X-Ray: conical 50º |
| Bottom Angle |
X-Ray: conical 50º |
| Lateral Access |
16° of 2θ is accessible |
| Heating |
Internal ring |
| Cooling |
N/A |
| DAC Diameter |
51 mm |
| DAC Height |
35 mm |
| Working Distance to Sample |
12 mm |
| Numerical Aperture |
TBC |
| Interfacing Solution |
TBC |
Maximum pressure is dependent upon the culet size of the anvils.
easyLab is committed to its policy of continuous improvement.
Specifications may change without notice.
easyLab and Diacell are registered trademarks of easyLab Technologies Ltd.
Parameters
|
Experimental Techniques
|
far-IR |
Fluorescence |
FTIR |
Infrared |
Raman |
X-Ray |
|
|
Maximum Pressure
|
1 GPa |
10 GPa |
100 GPa |
3.0 GPa |
30 GPa |
50 GPa |
|
|
Temperature Range
|
High Temperatures |
Room Temperature |
|
|
