|
Spares for Diacell® DACs. Sold in units.
easyLab makes extensive use of gas membranes to drive cell pistons in our Diacell® range of DACs. A gas membrane is rather like a motor tyre with one very thin wall. When pressurised internally, this wall bulges.
Advantages of this type of drive include the ability to apply very small incremental loads, remote operation, and the achievement of higher pressures due to absence of friction associated with bolts. easyLab are able to supply both additional gas membrane drives and control boxes, as listed below:
A76010: - Drives the Bragg-(G) series, the HeliosDAC and the μScopeDAC-RT(G)
A76020: - Drives the OptiDAC and OmniDAC cells.
A76030: - Drives the CryoDAC-Nitro A76040: - Drives the μScopeDAC-HT(G) cells.
Diacell® GM Controller: - This is the controller for the gas-membranes, and contains valves, couplings, pressure measurement and digital display modules. The controller is also fitted with a quick release Swagelok coupling that allows ready disconnection of the cell from the system, without loss of gas content. The GM Controller works off a 12 volt power supply.
Technical Specifications
N/A
Parameters
|